Heating and Cooling

Air conditioner not cooling

by Edward J. Thunderbird

Filter, breaker, coil and capacitor: the common fixes.

DifficultyModerate
Time1 hour
Do it yourself$10 to $60
Hire a pro$150 to $600 (refrigerant leaks more)
SignsHow it worksTools and partsStep by stepMaintenanceWhen to call a pro

Signs of the problem

How it works

A central AC moves heat from inside to the outside unit. Dirty filters and coils, a tripped breaker or a failed capacitor (the part that starts the fan and compressor motors) are common and cheap. Low refrigerant means a leak and needs a licensed tech.

Tools and parts

Tools

Parts and what they cost

PartTypical cost
Filter$5 to $40
Run capacitor$15 to $40
Contactor$15 to $40
Coil cleaner$10 to $15

Total cost

Cost
Do it yourself$10 to $60
Hire a pro$150 to $600 (refrigerant leaks more)

Costs are typical U.S. prices checked November 18, 2026; they vary by region and change often. Pro prices include labor. Fix Critical is not paid by any store or brand.

Step by step

Safety first
  1. Replace the filter. Set the thermostat to COOL and several degrees below room temperature.
  2. Check the breaker and the outdoor disconnect.
  3. If the lines or coil are iced, turn the system OFF and the fan ON for a few hours to thaw; a dirty filter is the usual cause.
  4. Turn the power off at the disconnect and hose off the outside coil from the inside out, gently.
  5. If the outside fan does not spin but the unit hums, the capacitor has likely failed (often bulging on top). A pro or experienced DIYer can replace it with an exact match.

Maintenance: keep it from happening again

When to call a pro

Low refrigerant, compressor will not start after a new capacitor, or electrical work you are not comfortable with.

← Furnace not heatingAll heating and coolingWood stove and chimney cleaning →