Heating and Cooling
Furnace not heating
by Edward J. Thunderbird
Checks to make before the service call, in the order techs use.
DifficultyEasy to moderate
Time30 to 60 minutes
Do it yourself$5 to $60
Hire a pro$150 to $500
Signs of the problem
- Blowing cold air
- Not running at all
- Starts then shuts off
- Burner lights then goes out
How it works
A gas furnace needs power, a call for heat from the thermostat, gas, a working igniter and flame sensor, and enough airflow. A clogged filter or a dirty flame sensor causes a surprising number of no-heat calls.
Tools and parts
Tools
- Screwdrivers (Tools Critical)
- Fine sandpaper or steel wool
- Flashlight
Parts and what they cost
| Part | Typical cost |
|---|---|
| Furnace filter | $5 to $40 |
| Thermostat batteries | $3 to $6 |
| Flame sensor | $15 to $40 |
| Hot surface igniter | $25 to $60 |
Total cost
| Cost | |
|---|---|
| Do it yourself | $5 to $60 |
| Hire a pro | $150 to $500 |
Costs are typical U.S. prices checked November 18, 2026; they vary by region and change often. Pro prices include labor. Fix Critical is not paid by any store or brand.
Step by step
Safety first
- Smell gas? Leave the house and call the gas company from outside.
- Turn off power before opening the furnace.
- Have a CO alarm near bedrooms.
- Check the thermostat: set to HEAT, set above room temperature, fresh batteries.
- Check the furnace switch (looks like a light switch near the furnace) and breaker are ON.
- Replace a dirty filter. A clogged filter makes the furnace overheat and shut down.
- Look through the window at the blinking light and match the code on the door chart.
- If it lights then goes out after a few seconds, turn the power off and clean the flame sensor (thin metal rod near the burner) with fine sandpaper.
- Check that the outside intake and exhaust pipes (on high-efficiency furnaces) are not blocked by snow or nests.
Maintenance: keep it from happening again
- Change the filter every 1 to 3 months.
- Yearly professional tune-up and CO check.
- Keep vents and returns clear.
When to call a pro
Gas smell, cracked heat exchanger, error codes for gas valve or pressure switch, or the igniter keeps failing.