Vehicles and Trailers

Replace brake pads

by Edward J. Thunderbird

Squealing brakes? Pads are a 1 to 2 hour job that saves hundreds.

DifficultyModerate
Time1 to 2 hours per axle
Do it yourself$40 to $280 per axle
Hire a pro$250 to $600 per axle
Replace brake pads
Replace brake pads: the fix in progress. AI-generated image.
SignsHow it worksTools and partsStep by stepMaintenanceWhen to call a pro

Signs of the problem

How it works

Disc brakes squeeze pads against rotors. Pads wear; when they get thin, a metal tab squeals. If you hear grinding, the pads are gone and the rotor is being damaged.

Tools and parts

Tools

Parts and what they cost

PartTypical cost
Brake pads (per axle)$30 to $80
Rotors (per axle, if needed)$60 to $200
Brake cleaner and grease$10 to $15

Total cost

Cost
Do it yourself$40 to $280 per axle
Hire a pro$250 to $600 per axle

Costs are typical U.S. prices checked November 18, 2026; they vary by region and change often. Pro prices include labor. Fix Critical is not paid by any store or brand.

Step by step

Safety first
  1. Loosen the lug nuts, raise the vehicle on jack stands, and remove the wheel.
  2. Remove the caliper bolts and hang the caliper with wire; never let it hang by the hose.
  3. Remove the old pads. Measure the rotor; replace if it is below the minimum thickness stamped on it or badly grooved.
  4. Push the piston back with a C-clamp (open the brake fluid cap first and watch it does not overflow).
  5. Install the new pads with the clips and a little brake grease on the contact points, then the caliper. Torque bolts to spec.
  6. Pump the brake pedal until firm BEFORE driving. Break in the pads with several gentle stops.

Maintenance: keep it from happening again

When to call a pro

Soft or sinking pedal, leaking fluid, ABS light, or seized calipers.

← Change your oilAll vehicles and trailersTest and replace a battery →