Electrical
Replace an outlet
by Edward J. Thunderbird
Loose, cracked or dead outlets: a 20-minute fix with the power off.
DifficultyEasy
Time20 minutes
Do it yourself$5 to $10
Hire a pro$100 to $200
Signs of the problem
- Plugs fall out
- Cracked or scorched face
- Outlet is dead
- Outlet warm to the touch
How it works
Outlets wear out: the springs that grip the plug loosen and connections work loose, which causes heat. Replace with the same amp rating (15 or 20 amp) and use the screw terminals, not the push-in holes.
Tools and parts
Tools
- Screwdrivers (Tools Critical)
- Pliers (Tools Critical)
- Non-contact voltage tester
- Plug-in outlet tester
- Wire strippers
Parts and what they cost
| Part | Typical cost |
|---|---|
| Outlet (15 or 20 amp) | $3 to $8 |
| Cover plate | $1 to $3 |
Total cost
| Cost | |
|---|---|
| Do it yourself | $5 to $10 |
| Hire a pro | $100 to $200 |
Costs are typical U.S. prices checked November 18, 2026; they vary by region and change often. Pro prices include labor. Fix Critical is not paid by any store or brand.
Step by step
Safety first
- Power off at the breaker and tested before you touch wires.
- Aluminum wiring (dull silver) needs special outlets and an electrician.
- Kitchen, bath, garage and outdoor outlets need GFCI protection.
- Turn off the breaker. Check the outlet with a tester to be sure it is dead (test both halves).
- Remove the cover and the two screws holding the outlet; pull it out.
- Take a photo. Black (hot) goes to the brass screw, white (neutral) to the silver screw, bare or green to the green ground screw.
- Move one wire at a time to the new outlet, wrapping it clockwise under the screw, and tighten.
- Fold the wires back, mount the outlet, put the cover on, and turn the power back on.
- Check with the outlet tester.
Maintenance: keep it from happening again
- Replace loose outlets before they overheat.
When to call a pro
Aluminum wiring, scorched wires, or no ground wire in the box.