Electrical
Breaker keeps tripping
by Edward J. Thunderbird
Why a breaker trips, how to find the cause, and when it is dangerous.
DifficultyEasy (diagnosing)
Time30 minutes to diagnose
Do it yourself$0 to $20
Hire a pro$150 to $400
Signs of the problem
- Breaker trips when an appliance turns on
- Trips at random
- Trips immediately when reset
- Breaker feels hot or smells burned
How it works
A breaker trips to protect the wiring. Three causes: an overload (too much on one circuit), a short circuit (hot wire touching neutral or ground) or a ground fault. Overloads trip after a while; shorts trip instantly.
Tools and parts
Tools
- Non-contact voltage tester
- Plug-in outlet tester
- Screwdrivers (Tools Critical)
Parts and what they cost
| Part | Typical cost |
|---|---|
| Replacement breaker (same brand and type) | $10 to $60 |
Total cost
| Cost | |
|---|---|
| Do it yourself | $0 to $20 |
| Hire a pro | $150 to $400 |
Costs are typical U.S. prices checked November 18, 2026; they vary by region and change often. Pro prices include labor. Fix Critical is not paid by any store or brand.
Step by step
Safety first
- Never replace a breaker with a bigger one; the wire can overheat and start a fire.
- A hot, buzzing or burned-smelling panel needs an electrician now.
- Do not open the panel cover unless you are trained.
- Turn off and unplug everything on that circuit.
- Reset the breaker by pushing it fully OFF, then ON.
- Plug things back in one at a time. If it trips when a certain appliance starts, that appliance (or its cord) is the problem, or the circuit is overloaded.
- Move big loads (heaters, microwaves, hair dryers) to other circuits.
- If it trips instantly with everything unplugged, there is a short in the wiring: leave it off and call an electrician.
Maintenance: keep it from happening again
- Do not run space heaters on extension cords.
- Test GFCI and AFCI breakers monthly with the test button.
When to call a pro
Instant trips, burned smell, warm panel, or replacing a breaker.