Plumbing

Fix a running toilet

by Edward J. Thunderbird

Usually a $10 flapper. Saves up to 200 gallons a day.

DifficultyEasy
Time15 to 45 minutes
Do it yourself$5 to $35
Hire a pro$120 to $250
Fix a running toilet
Fix a running toilet: the fix in progress. AI-generated image.
SignsHow it worksTools and partsStep by stepMaintenanceWhen to call a pro

Signs of the problem

How it works

Inside the tank, the flapper seals the flush valve and the fill valve refills the tank. A worn flapper leaks water into the bowl, so the fill valve keeps turning on. A fill valve set too high spills into the overflow tube.

Tools and parts

Tools

Parts and what they cost

PartTypical cost
Flapper$5 to $12
Fill valve$10 to $25
Complete repair kit$20 to $35

Total cost

Cost
Do it yourself$5 to $35
Hire a pro$120 to $250

Costs are typical U.S. prices checked November 18, 2026; they vary by region and change often. Pro prices include labor. Fix Critical is not paid by any store or brand.

Step by step

Safety first
  1. Put a few drops of food coloring in the tank. If color shows in the bowl in 15 minutes without flushing, the flapper leaks.
  2. Shut off the water at the valve behind the toilet and flush to empty the tank.
  3. Unhook the old flapper from the ears on the overflow tube and the chain from the handle. Take it to the store to match.
  4. Install the new flapper and set the chain with a little slack (about half an inch).
  5. If water runs into the overflow tube, lower the float so the water stops about 1 inch below the top of the tube, or replace the fill valve.
  6. Turn the water back on and test.

Maintenance: keep it from happening again

When to call a pro

Cracked tank or bowl, or leaks at the floor (wax ring) if you would rather not lift the toilet.

← Thaw and prevent frozen pipesAll plumbingFix a leaky faucet →