Plumbing
Fix a leaky faucet
by Edward J. Thunderbird
Drips waste water and money. Most fixes are a cartridge or washer.
DifficultyEasy to moderate
Time30 to 60 minutes
Do it yourself$5 to $40
Hire a pro$150 to $300
Signs of the problem
- Drip from the spout
- Leak around the handle
- Handle is hard to turn
- Hot or cold will not shut off fully
How it works
Older two-handle faucets seal with rubber washers; most newer ones use a cartridge. A worn washer or cartridge lets water past. Bring the old part to the store to match it.
Tools and parts
Tools
- Screwdrivers (Tools Critical)
- Wrenches (Tools Critical)
- Pliers (Tools Critical)
- Allen wrench set
- Plumber's grease
Parts and what they cost
| Part | Typical cost |
|---|---|
| Washers and O-ring kit | $5 to $10 |
| Faucet cartridge | $15 to $40 |
| New faucet (if old) | $60 to $200 |
Total cost
| Cost | |
|---|---|
| Do it yourself | $5 to $40 |
| Hire a pro | $150 to $300 |
Costs are typical U.S. prices checked November 18, 2026; they vary by region and change often. Pro prices include labor. Fix Critical is not paid by any store or brand.
Step by step
Safety first
- Shut off the water first.
- Do not overtighten; old brass cracks.
- Shut off the valves under the sink and open the faucet to drain it. Plug the drain so small parts do not fall in.
- Pop off the decorative cap and remove the handle screw.
- Unscrew the retaining nut or clip and pull out the cartridge or stem. Note which way it faces.
- Take it to the hardware store and buy the exact match (brand and model help).
- Grease the O-rings, install the new part facing the same way, and reassemble.
- Turn the water on slowly and check for leaks.
Maintenance: keep it from happening again
- Clean aerators yearly.
- Do not force handles closed; it wears the seals.
When to call a pro
Corroded valves that will not shut off, or leaks inside the wall.