Vehicles and Trailers

Fix trailer lights

by Edward J. Thunderbird

Bad grounds cause most trailer light problems.

DifficultyEasy to moderate
Time30 minutes to 2 hours
Do it yourself$10 to $60
Hire a pro$100 to $250
SignsHow it worksTools and partsStep by stepMaintenanceWhen to call a pro

Signs of the problem

How it works

Trailer lights get their ground through a white wire to the trailer frame. Rust and loose grounds cause most problems. Corroded plugs and broken wires cause the rest.

Tools and parts

Tools

Parts and what they cost

PartTypical cost
LED trailer light kit$25 to $60
4- or 7-way plug$8 to $20
Dielectric grease$5 to $8
Heat-shrink connectors$8 to $15

Total cost

Cost
Do it yourself$10 to $60
Hire a pro$100 to $250

Costs are typical U.S. prices checked November 18, 2026; they vary by region and change often. Pro prices include labor. Fix Critical is not paid by any store or brand.

Step by step

Safety first
  1. Test the truck plug with a circuit tester while someone works the lights.
  2. Clean the truck and trailer plugs with a wire brush and add dielectric grease.
  3. Check the trailer ground: the white wire should bolt to clean, bare metal on the frame. Clean and tighten.
  4. Check each light: bad bulbs, rusty sockets, broken wires where they flex.
  5. Splice breaks with heat-shrink connectors, and protect wires with loom.
  6. Consider LED lights: sealed, brighter and longer-lasting.

Maintenance: keep it from happening again

When to call a pro

Electric brake controller problems, or the truck side has no power.

← Test and replace a batteryAll vehicles and trailersChange your oil →