Wells and Pumps
Low water pressure (well)
by Edward J. Thunderbird
Weak showers and slow faucets: tank, switch, filter or pump.
DifficultyEasy to moderate
Time30 to 60 minutes
Do it yourself$5 to $50
Hire a pro$150 to $350
Signs of the problem
- Weak flow everywhere
- Pressure drops fast then recovers
- Pump clicks on and off quickly (short cycling)
- Low flow at one faucet only
How it works
Pressure comes from the pressure tank and switch settings (usually 30/50 or 40/60 psi). A clogged sediment filter, a waterlogged tank, or a worn pump all lower it. If only one faucet is weak, the aerator is plugged.
Tools and parts
Tools
Parts and what they cost
| Part | Typical cost |
|---|---|
| Sediment filter cartridge | $8 to $25 |
| Faucet aerator | $3 to $8 |
| Pressure switch | $25 to $45 |
Total cost
| Cost | |
|---|---|
| Do it yourself | $5 to $50 |
| Hire a pro | $150 to $350 |
Costs are typical U.S. prices checked November 18, 2026; they vary by region and change often. Pro prices include labor. Fix Critical is not paid by any store or brand.
Step by step
Safety first
- Turn off power to the pump before adjusting the switch.
- Relieve pressure (open a faucet) before opening filters.
- If only one faucet is weak, unscrew the aerator and rinse out the grit.
- Replace the whole-house sediment filter if you have one; they plug quickly with sandy water.
- Watch the pressure gauge while running water. Note where the pump turns on (cut-in) and off (cut-out).
- If the pump turns on and off every few seconds, the tank is waterlogged: see Check the pressure tank.
- If cut-out never reaches the setting (for example it stops at 45 instead of 50) the pump may be worn or the well low.
Maintenance: keep it from happening again
- Change sediment filters every 3 to 6 months.
- Check tank pressure yearly.
When to call a pro
Pump cannot reach cut-out pressure, or water turns muddy or sputters (well may be going dry).