Wells and Pumps
Check and charge the pressure tank
by Edward J. Thunderbird
Stops short cycling and saves the pump. Ten minutes, a tire gauge and an air compressor.
DifficultyEasy
Time30 minutes
Do it yourself$0 (or $250 to $500 for a new tank)
Hire a pro$100 to $200 to check; $600 to $1,200 to replace a tank
Signs of the problem
- Pump turns on and off every few seconds
- Pressure gauge needle jumps
- Water spits from the faucet
- Air valve on the tank leaks water
How it works
A modern pressure tank has an air bladder. The air pressure inside should be 2 psi below the pump cut-in pressure (28 psi for a 30/50 switch, 38 psi for 40/60). If the air leaks out, the tank fills with water and the pump short cycles, which burns it out.
Tools and parts
Tools
- Tire pressure gauge
- Air compressor or bike pump
- Garden hose
Parts and what they cost
| Part | Typical cost |
|---|---|
| Replacement tank (20 to 44 gallon) | $250 to $500 |
Total cost
| Cost | |
|---|---|
| Do it yourself | $0 (or $250 to $500 for a new tank) |
| Hire a pro | $100 to $200 to check; $600 to $1,200 to replace a tank |
Costs are typical U.S. prices checked November 18, 2026; they vary by region and change often. Pro prices include labor. Fix Critical is not paid by any store or brand.
Step by step
Safety first
- Always turn off power and drain the tank before checking air.
- Do not over-inflate.
- Turn off the pump breaker.
- Drain the tank: open a faucet and the tank drain until no more water comes out.
- Check the air valve on top of the tank with a tire gauge.
- Fill to 2 psi below cut-in (28 psi for 30/50, 38 psi for 40/60).
- If water comes out of the air valve, the bladder is broken: replace the tank.
- Close the drain and faucet, turn the breaker back on, and watch the pump run to cut-out.
Maintenance: keep it from happening again
- Check the air charge once a year.
When to call a pro
Replacing a tank if you are not comfortable with plumbing and wiring.